PAL Portable Aquatic Lift (ADA Compliant)

The PAL is a completely portable aquatic lift, requiring no mounting to the pool deck. It contains over seven hundred pounds of counter weight to support a lifting capacity of 300 lbs. Its padded handle and ball bearing casters make the PAL easy to move, making it the perfect fit for facilities requiring accessibility to more than one water location, as well as for those who wish to store the unit away when it is not needed.

It is not necessary to sacrifice a swim lane to mount the unit, which can be conveniently stored when not in use. The PAL features a mechanical actuator, which is the same reliable technology used on hospital beds all over the world. The actuator is powered by a rechargeable 24-volt battery; a consistent power source that insures that the PAL will work when you need it to work. Every time.

The unique design of the PAL allows it to be adaptable to virtually all swimming pool configurations. Its arms reach over the pool edge and can vary in length depending upon the amount of required clearance. The PAL works well with edgeless designs, as well as with pools with curbs, gutters and skimmers. Either the user or attendant can operate the PAL with ease. The unique design of the seat was specifically engineered for people with disabilities. The seat is deep enough to provide stability and has no edge to facilitate transfers. The controls on the waterproof hand pendant are easy to understand and operate. Set-up consists of rolling the lift into place along the edge of the pool and locking the wheels. Pricing includes a footrest. Battery included.

The PAL Portable Aquatic Lift is available in the following models:

PAL 1000 – Standard portable aquatic lift is the perfect lift solution for facilities wishing to service more than one pool

Pal Hi/Lo –A variation of the PAL designed for in facilities that have both in-ground pools and above ground spas

PAL Spa –Designed for above ground pools and for above ground spas up to 52” above the deck

Click here for Specs

Accessories:

Stability Vest
The Stability Vest was designed to facilitate the transfer of individuals with limited or no independent upper body or trunk stability. The vest attaches the user to the chair, strapping them in for support.

Detachable Armrests
Detachable powder coated stainless steel armrests are available for increased sense of security.

Seat Pad
Waterproof seat pad designed to enhance comfort and minimize potential skin damage that could occur during transfer is available as an optional accessory.

PAL All Weather Cover
Protect your investment with a full, all-weather cover. Custom fitted for the PAL-Portable Aquatic Lift. The cover is made from rugged blue nylon cordura.

Spine Board Attachment
The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Attachment. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure.

Splash! Semi Portable Aquatic Lift (ADA Compliant)

The Splash! Aquatic Lift is a semi-portable lifting system designed for swimming facilities seeking to provide user-friendly access to their swimming pools. The Splash! is battery powered and is operated by a screw driven actuator. The design and durability of the system ensures consistent operation and minimizes service problems.

The standard Splash! lift is attached to the pool deck using a standard, 1.90 ID round anchor socket used for starting blocks or backstroke flag stanchions. Our Splash! HD (Heavy Duty) Model uses a square anchor, which is included in the pricing. We request a Poolside Configuration Worksheet with each order so that the lift can be engineered to match the each customer’s specific pool specifications. The Splash! is virtually maintenance free. The components are made from corrosion-resistant materials, including powder-coated aluminum (arms, housing), and powder-coated stainless steel (base, mast, and seat frame). The unique seat of the lift was specifically designed to provide the user with the greatest possible comfort and ease of transfer. The hand control is completely waterproof, and allows either the user or the attendant to control its operation with ease. The control box and battery are water resistant and should be protected from long exposure to the water. A small, waterproof cover is included with each lift to cover the control box when the system is in use. If the lift is used outdoors, an optional full cover is available for purchase and is recommended to use to protect the system. Pricing includes a footrest.

The Splash! lift is available in the following forms:

Splash! – Standard Splash! lift provides 300lb lifting capacity. Mounted to deck with standard 1.9 ID round anchor socket.
Splash! Spa- Designed for use with spas up to 52” (132 cm) above the deck
Splash Hi/Lo – The perfect lift for facilities that have an above ground spa and an in-ground pool. The dual position chair allows a single lift to be used in both locations.
Splash! HD – Increased lifting capacity to 400lb. Mounted to deck using square anchor (included with lift).
Splash! Extended Reach – For use with pools with unusual gutter configurations requiring a longer reach to the water line.

Click here for Specs

Accessories:

Splash! All Weather Cover
Protect your investment with a full, all-weather cover. Custom fitted for the Splash! Semi-Portable Aquatic Lift. The cover is made from rugged blue nylon cordura.

Stability Vest
The Stability Vest was designed to facilitate the transfer of individuals with limited or no independent upper body or trunk stability. The vest attaches the user to the chair, strapping them in for support.

Anchor/Cap/Wrench (for standard Splash!)
Standard deck sleeve measuring 1.9” diameter x 6” depth is available for mounting the standard Splash! lift. The cap covers the hole when the lift is not in place. The wrench unscrews the cap from the anchor.

Detachable Armrests
Detachable powder coated stainless steel armrests are available for increased sense of security.

Seat Pad
Waterproof seat pad designed to enhance comfort and minimize potential skin damage that could occur during transfer is available as an optional accessory.

Spine Board Attachment
The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Attachment. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure.

Splash! Caddie
The Splash! Caddie facilitates handling, transporting and storing a Splash! aquatic lift. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash! Caddie helps to protect both your investment and your staff. The Caddie simplifies both insertion and removal of the connector shaft into the insert in the pool deck and becomes a convenient storage rack for the lift when not in use.

Aquatic Access
IGAT-180 

Water powered pool lift. Water Access Required by ADA. Self operated or patient assisted models. Powered by water pressure. Easy to install & safe to use. Click for specs

In-Ground Pool Lifts

Vertical Seat travel - 42". Recessed socket and cover included.

For IGAT models, a cross-section sketch, with all pertinent measurements, showing the configuration of pool deck, coping, gutter, pool wall, and deck-to-water level, must be included with each order.

Model IGAT-180 -- ADA-compliant featuring automatic 180° turn. Includes necessary foot rest, socket and socket cover.

Model IGAT-180 Above-Deck -- ADA-compliant featuring automatic 180° turn. Includes necessary foot rest. Unique above-ground mounting provides access to pools with raised edges, pool covers, and some spas with seats.

Model IGAT-180/135-- ADA-compliant featuring automatic 135° turn. for pools or spas with built in benches featuring stainless steel cylinder. Includes foot rest, socket and socket cover.

Model IGAT-90 -- Automatic 90° turn. Stainless steel cylinder.

Model IGMT -- Manual 360° turn. Install socket 12"-18" from pool edge. Seat configuration is determined by purchaser and Aquatic Access.

Model IGRC -- Manual 360° turn. PVC sleeve (not included) replaces recessed socket and cover. PVC sleeve installs at location specified by Aquatic Access. Seat configuration is determined by purchaser and Aquatic Access.

Socket Plate -- Replaces recessed socket, for wood or cantilevered concrete decks.

Additional Recessed Socket (for multiple locations)

Additional Recessed Socket Plate (for multiple locations)

Additional Recessed Socket Covers

Above-Ground Pool and Spa Lifts

Stainless steel cylinder. Seat turns 360° and has two arms. Seat side is parallel to pool. For free-standing, above-ground tubs, pools, and spas, specify height and width of spa wall, bench seats, etc. on cross-section sketch, which must be included with each order. Also specify ground, concrete, or wood mounting.

Model AG-48WP -- 48" cylinder. Vertical seat travel- 31". Mounts to 6"x 6" wooden post (not included) sunk at least 30" in ground. Mounting hardware included. Seat configuration is determined by purchaser and Aquatic Access.

Model AG-48 -- For spa walls up to 48" above ground. Vertical seat travel is 31". Seat configuration is determined by purchaser and Aquatic Access.

Model AG-72 -- 72" cylinder. Vertical seat travel- 51". For use in high and deep therapy pools. 6 x 6" stainless steel plate bolts to floor. Cylinder may attach to top pool flange. Seat configuration is determined by purchaser and Aquatic Access.